Plate Air Filter Cleaning

1, open the inhalation grille in the device, press and hold the buttons on both sides and gently pull down ;.........

2. Drag the hook on the air filter to pull the unit out in a diagonal downward direction; and

3. Remove the dust from it with a device similar to a vacuum cleaner or rinse it with warm water; and

4, if you encounter too much dust, you can use a soft brush with neutral detergent to clean, clean the water after shaking dry, placed in a cool place to dry in the sun.

5, do not use more than 50 ℃ hot water for cleaning, so as to avoid the phenomenon of equipment color or deformation, and do not dry on the fire;

6, after the completion of the cleaning must be installed in a timely manner on the equipment, the installation of the equipment will be hung on the upper part of the protruding inhalation grille, and then fixed to the inhalation grille above the inhalation grille, the inhalation grille of the back of the convex handle to the inward slowly sliding until the entire device will be pushed into the grille.

7, the last step is to close the inhalation grille, which is exactly the opposite of the first step, press and hold the filter signal reset button on the control panel, at which time the reminder sign for cleaning will disappear ;)

8, another reminder, if the air filter is used in an environment with too much dust, then the number of cleaning should be increased depending on the circumstances, generally half a year is appropriate.