What are the characteristics and functions of HV high efficiency filters? What problems will occur in the use of high-efficiency filters?

HVHigh Efficiency FilterWhat are the features and functions?High Efficiency FilterWhat problems can occur with use?

HV high efficiency filter is the type of purification equipment, of course, its filtration effect is obvious to everyone. So today we are together to understand the specific information of HV high efficiency filter, HV high efficiency filter for optical electronics, LCD liquid crystal manufacturing, biomedicine, precision instruments, PCB printing and other industries, dust-free purification workshop air conditioning end of the air supply.

The filtration precision of HV high efficiency filter is high, so that the suspended solids in the water can be removed up to 95% or more, and at the same time, it can also filter the large molecules of organic matter in the water, viruses, iron and other impurities have played a role in the removal of HV high efficiency filter filtration speed is also quite fast, it is more than three times that of the ordinary filters; the holding capacity is more than four times that of the ordinary filters. Dosing is also lower, because its own design provides convenience for this problem. For these two points, it greatly improves the efficiency of the industry.

Up to now, the big feature of HV high efficiency filter is that it has good filtration effect, and the tiny molecules in the air can also be filtered out, which makes it more helpful for purifying the environment. Of course, the dust capacity of HV high efficiency filter is also quite large, it has no partition design, which makes the filtration more convenient. Perhaps, some friends will worry that the lack of partition will affect the effect of moisture, you do not need to worry about this. For this partition problem, our designers have a new idea, the use of V-shaped design, the use of fiberglass; so you can completely overcome this shortcoming at the same time also played a fire-resistant role.

HV high-efficiency filters are not only used in the air supply of the air conditioning end of optical electronics and precision instruments, but also in a wide range of applications. For example: aquaculture circulating water treatment, industrial circulating water treatment and so on. Why use it in these places? HV high-efficiency filters are made of sturdy materials so that they can maintain a stable working condition under turbulent flow conditions, which is a function that cannot be realized by other filters.

When we install HV high efficiency filters, we should pay attention to a few points. Before installation, it should be cleaned once, and the system and purification workshop must be cleaned in many ways. In the cleaning process, we should pay attention to not use ordinary vacuum cleaners to use vacuum cleaners equipped with ultra-clean filter bags; this plays a protective role for the filter. In the process of unpacking, we have to be in the installation site can be carried out. After taking it out, we should make an appearance check and require each filter to have specific test data of performance indicators. When in use, we should pay attention to the leakage detection, but also pay attention to the booster deployment and so on.

Of course, even high-efficiency filter equipment in the process of use is also possible problems, this time we need to master is according to the different problems of the appropriate transformation.

I. Problems with equipment

1. Initial pressure loss is large; and

2, due to the coarse filter material, the filtration efficiency of the equipment can only reach the effect of intermediate effect.

3, cartridge replacement is inconvenient.

4, because the filtration efficiency is not high enough, so the dust pollution is easy to enter the equipment, resulting in corrosion of parts, wear and scaling, etc.;.

5, because the structure of the limitations of the equipment makes the overall filter area is small.

II. Methods of modification of equipment

1、Adopting PLC control system to backblow the equipment;.

2. Adoption of room-tower type frame structure design; and

3, cartridge installation using the hanging method.

4、Using pleated cartridges.

5. Adopt self-cleaning air filter.