How to install high-efficiency filters in purification workshop? What purification equipment needs to be installed in a 100,000-class clean room?

净化车间的High Efficiency Filter怎么安装？十万级无尘车间需要安装哪些净化设备？

做十万级无尘车间净化工程的企业都知道，High Efficiency Filter的安装和密封直接影响洁净室的净化效果。那么高效过滤器如何安装？下面就小编给大家科普一下十万级无尘净化车间安装高效过滤器的方法。

Fixed high-efficiency filter skeleton material should be flat and have good rigidity, fire prevention and no dust. Aluminum alloy skeleton is light in weight, and general steel (channel steel, angle steel, T-shaped steel, I-beam and steel plate) skeleton should be prevented from rusting, and the surface layer should be galvanized. Construction and installation of the surface is still inevitably damaged, but also with the paint for local repair, can also be used directly on the surface of the steel skeleton spraying high-strength ageing-resistant paint. No matter what kind of skeleton is used, attention should be paid to the connection between the skeleton components to be tight and smooth, otherwise it will make the interface of the grass-roots level where the high-efficiency filter is installed uneven, which will directly affect the sealing quality.

There are mainly the following ways to install high-efficiency filters in a class 100,000 clean room.
1, installed in the duct, in the use of local hole plate top feeding, diffusion type top feeding and louvered air outlet side feeding clean room, high efficiency filters are usually installed in the technical sandwich or the duct inside the duct. In this way, if there is leakage in the installation, it can only leak into the technical sandwich or the duct without affecting the cleanliness of the room.

2, in the ceiling air supply outlet installation, this way is divided into the top mounted (installed above the ceiling) and the bottom mounted (installed below the ceiling) two kinds.

In the vertical unidirectional flow cleanroom, the installation of high-efficiency filters also have the upper and lower mounted points. In the horizontal unidirectional flow clean room, high-efficiency filters are best installed in the air supply static pressure room, which not only facilitates sealing, leakage detection and plugging, but also when the clean room purification and air conditioning system for intermittent operation, but also to avoid the filter and its pressure frame on the accumulation of dust to affect the cleanliness of the room.

The main sealing methods for the installation of high-efficiency filters are: a. Sealing gasket method, the current domestic sponge latex plate are open hole type, not suitable for high-efficiency filter installation of the sealing material, sponge rubber plate is closed hole type, as the sealing material has a good airtightness. b. Liquid tank sealing method, which is the use of inert liquids in the tank to be filled with the sealing method. This method has high airtightness, simple construction, easy to install.

How to install the high efficiency filter in the 100,000-class clean room you learned? These two methods are very good, you can choose the method suitable for their 100,000 clean room installation Oh.

---- extended reading

无尘车间在现代化生产中的应用十分广泛，食品，医学，机械工业等等都会用到无尘车间，然而我们很多人只知道无尘车间，却不知道在无尘车间包含了什么净化设备！

高效送风口

此设备为万级，十万级乱流洁净室新建，改建工程净化空调系统终端送风装置。本装置主要由静压箱，高效过滤器，铝合金扩散板，标准法兰接口等组成，造型美观，结构简单，使用可靠。此设备送风口为下装式，具有在洁净室内安装和更换过滤器方便的优点，高效过滤器采用机械压紧或液槽密封装置，确保风口安装无泄露，密封可靠，净化效果好，对一般净化车间工程均可适用。

FFU风机过滤单元

风机过滤单元(FFU)是一种空气自净装置，可室内吊顶安装或放置在支架上，使局部级别达到百级。也可用于洁净室末端送风。该设备设有初、高效两级过滤装置。风机从顶部将空气吸入并经初、高效过滤器过滤，过滤后的洁净空气在整个出风口送出。安装方式有悬挂式和落地支架两种。

关于无尘车间装修所需要的设备分享今天就到这啦，不同级别的无尘洁净要求设备设施会有些许不同。